Bmax Y13 review: is this replacement charger worth it?
Worth it, with one check first
Why laptop chargers die at the worst possible time
Your laptop hits nine percent and the charger that came with it died somewhere around month fourteen, taken out by a bent pin or a crimped cable, you're not sure which. You search bmax y13 review looking for the actual laptop, but what you actually need right now is thirty dollars of new brick before your afternoon meeting turns into a paperweight. The generic charger in the results looks close enough. That's the whole gamble.
How a universal 12V laptop charger actually works
Here's where your money actually goes on a thirty-dollar charger: barely any of it is the transformer, most of it is matching three numbers exactly, voltage, current, and the physical barrel diameter of the connector. BMAX doesn't build its own charging circuit any more than Teclast or SGIN do; a huge slice of the budget Windows laptop market runs on the same handful of Chinese ODM reference boards, which is the unglamorous reason one twelve-volt adapter with the right size plug will happily run a BMAX Y13, a Teclast F7, and half a dozen laptops that have never heard of each other. TAIFU's pitch here isn't cleverness, it's arithmetic: match the output to what the reference board expects, 12V, up to 3A, 36 watts, and the laptop can't tell the difference between this and the box it shipped in. The parts that matter once it's plugged in are the boring ones, over-voltage, over-current and short-circuit protection, because a no-name brick without those is the kind of thing that takes your motherboard down with it when it fails. The fireproof shell and copper core are the same story, insurance against the one bad day rather than a feature you notice on the good ones. None of this makes your laptop charge faster than the original. It just means the cheap option isn't also the risky one, provided the plug size and voltage on your machine actually match what's listed.
So you're not buying a BMAX charger, you're buying a spec match. The brand on the plastic case is decoration, the twelve volts and the barrel size are the actual product, and once those line up, a thirty-dollar adapter does exactly what the two-hundred-dollar laptop's original brick did.
Who this BMAX Y13 charger is for, and who should skip it
Worth it if
- your old adapter is rated 12V and around 3A with a matching barrel size
- you own a BMAX Y13, Teclast, SGIN, or similar ODM laptop listed as compatible
- you want a cheap replacement rather than an upgrade
- you're willing to check connector size before ordering
Skip it if
- you're not sure what voltage or amperage your laptop needs
- your laptop draws more than 3A or 36W
- you want a charger that ships from the original manufacturer
Not for anyone who doesn't know their laptop's exact voltage and amperage needs before ordering.
The TAIFU BMAX Y13 charger review verdict
If your BMAX Y13 or any of the other listed laptops just needs a working replacement at a fair price, this is a quiet yes; confirm the plug diameter and voltage on your old adapter first, not the brand name on the box. If you're not sure which laptop you actually own, or the machine draws more than 3A, skip it and order the part number direct from the manufacturer instead.
Once it arrives, the whole ritual is over in about a minute: plug it into the wall, seat the barrel connector, watch the charging light do its normal thing instead of nothing at all. That's the entire payoff of a replacement charger, no drama, no upgrade, just your laptop working again like the dead brick never happened. Keep the old charger's numbers, the voltage and the barrel size, written down somewhere, because the next one you need won't come with a manual either.
Amazon shoppers rate it 4.5 out of 5 across 153 ratings. That is their number, not ours.
Before you go
Will this charger work with my BMAX laptop if it's not exactly the Y13?
Yes, as long as your model is listed as compatible and needs 12V output at up to 3A, the barrel connector and voltage matter more than the exact model name.
Is a generic replacement charger actually safe to use instead of the original?
It's safe if it includes over-voltage, over-current and short-circuit protection, which this one lists, since those guard the laptop's motherboard the same way the original charger's circuitry does.
How do I know if the voltage and amperage match my laptop?
Check the fine print on your old adapter or the underside of your laptop, both list the required input voltage and amperage, and those numbers need to match what you're buying.
What happens if the charger doesn't supply enough current for my laptop?
The laptop may charge slowly, refuse to charge under load, or not power on at all, which is why matching the amperage rating matters more than matching the brand.
By the numbers
Like 93% of the 95 electronics products we've reviewed, this one earns a conditional "worth it, but" — just 7% clear our unconditional top tier. All verdicts are published as open data in the Is It Worth It Reviews Verdict Dataset (CC BY 4.0).
Full spec sheet
| Connector Type | DC Barrel |
|---|---|
| Compatible Devices | Laptops |
| Compatible Phone Models | BMAX MaxBook X15, Teclast F6, Teclast F7, Teclast X4, SGIN M15 |
| Special Features | Short Circuit Protection |
| Input Voltage | 110 volts |
| Amperage | 1 A |
| Wattage | 36 watts |
| Output Current | 1 A |
Keep comparing
More electronics reviews.