What do the table saw reviews really say about the SKIL TS6307-00?
Worth it, for jobsite and DIY use
Why a table saw fence that wanders is the real problem
You set the fence, line up the cut, and watch the board drift a hair off true before it reaches the blade. That drift is the complaint buried under most table saw reviews: a fence that wanders is a saw you can't trust, and on a jobsite floor that's never quite level, trust is the only thing standing between you and a kickback.
How the rack and pinion fence and folding stand actually work
Look at what actually holds the fence in place before you look at the price. On the TS6307-00, the fence rides on rack and pinion rails, a gear track and a matching pinion gear that lock the fence square to the blade the moment you clamp it down. That's the difference between a fence you nudge into place and hope, and one that's mechanically forced parallel every time, which is why the cuts stay straight from the first board to the fiftieth. The photo won't tell you this, but that fence geometry is also what keeps the saw from drifting out of alignment after a truck bed and a gravel lot, because the squareness is built into the rail, not into a soft plastic lock that wears loose over a season.
The folding stand works on the same logic. The legs are part of the saw's frame rather than a bolt-on accessory, so they snap into a fixed position instead of racking sideways on uneven ground. Watch what it's made of, not what it's styled with, and the cast aluminum tabletop is the tell here, it holds flat under a 4x4 in a way stamped sheet metal never does. The 15-amp motor, the 0-45 degree bevel stops, and the dust elbow are the parts every listing mentions, but they only matter once the fence and the stand have already earned their keep, because a powerful motor pushing wood through a crooked cut is just a faster way to waste lumber.
You're not really buying a table saw here, you're buying a fence that stays square without you thinking about it, on ground that was never meant to hold one steady. Everything else, the motor, the bevel stops, the dust port, is just what rides along once that fence problem is actually solved.
Who the SKIL TS6307-00 table saw is for, and who should skip it
Worth it if
- you move the saw between job sites or store it away between projects
- you work on ground that's rarely level or a proper shop floor
- you want fence adjustments that stay accurate cut after cut
- your cuts are mostly framing lumber and sheet goods, not fine furniture joinery
Skip it if
- you have a fixed shop with room for a full-size cabinet saw
- you need rip capacity or power beyond a 25-1/2 inch fence and a 15-amp motor
- you're cutting fine furniture joinery where table mass and precision matter more than portability
If you run a fixed shop with room for a cabinet saw, this one will feel like a compromise, not an upgrade.
The table saw reviews verdict on the SKIL TS6307-00
If you're setting up and breaking down on a different job site every week, this is a quiet yes, the fold and the fence were built for exactly that life. If you're working a fixed shop with a real outfeed table, a full-size cabinet saw will out-cut it every time, and fixing that isn't this saw's job.
Picture the first cut on a new job, saw unfolded on ground that isn't level, fence locked, and the board coming out straight without a second pass to correct it. That's the problem this saw actually removes, not the cutting itself but the guesswork around it. A very large number of owners land on the same note, that it sets up fast, holds steady on rough ground, and keeps its fence adjustment tight cut after cut, which is exactly the kind of detail that only shows up after months of hauling it, not on day one.
Amazon shoppers rate it 4.7 out of 5 across 2,903 ratings. That is their number, not ours.
Before you go
What is the best table saw for home use?
For home use, a compact benchtop or jobsite saw like the TS6307-00 usually beats a full cabinet saw, since most home projects need portability and a reliable fence far more than extra table mass.
What is the best table saw for value for money?
Value comes down to whether the fence stays accurate without constant re-checking, and rack and pinion fence rails at this price point are usually the feature that decides it.
Which is the best table saw?
There's no single best table saw, only the best one for how you'll use it: portability and setup speed for jobsite work, table mass and rip capacity for a fixed shop.
Are Harbor Freight table saws any good?
Budget table saws can cut acceptably for occasional use, but they tend to skimp on fence rigidity and motor durability, the two things that matter most once you're cutting daily.
By the numbers
Only 7% of the 86 home & garden products we've reviewed earn our top "worth it at list price" verdict — this is one of them. All verdicts are published as open data in the Is It Worth It Reviews Verdict Dataset (CC BY 4.0).
Full spec sheet
| Power Source | Corded Electric |
|---|---|
| Other Special Features of the Product | Brake |
| Voltage | 120 volts |
| Speed | 15 rpm |
| Number of Teeth | 24 |
| Number of Batteries | Unknown batteries required. |
| Cutting Angle | 90 degrees |
| Wattage | 1800 watts |
Keep comparing
More home & garden reviews.
We also post home & garden verdicts on Tumblr, Mastodon, Bluesky and on YouTube.