Is SUNLU PLA Filament Worth It for Your 3D Printer?
By Errol Whitfield, tools & DIY · updated 2026-07-25
Worth it if you print functional parts and want a spool that behaves the same on print thirty as it did on print one.
Worth it for functional prints, skip it if you already have a spool that works
around $45price at time of review — check Amazon for current
- Worth it ifYou print functional parts that need to survive drops or stress
- Skip it ifYou already have a reliable spool that prints cleanly
Amazon shoppers rate it 4 out of 5 across 1,277 ratings. That is their number, not ours.
Affiliate link. Opens Amazon in a new tab.
As an Amazon Associate, Is It Worth It Reviews earns from qualifying purchases. It costs you nothing extra, and it has never changed a verdict.
Picture pulling a spool out of storage after a few weeks off, hearing a faint hiss and pop from the nozzle, then watching a print come off the bed looking cloudy and weak instead of clean. If you have ever snapped a finished bracket with a light twist of your fingers, you know the printer usually was not the problem, the filament was. That is the doubt SUNLU PLA 3D printer filament is aimed squarely at: whether a spool can actually survive sitting on a shelf and still print something you would trust to hold weight.
Here is the part that actually matters. Standard PLA is hygroscopic, it pulls moisture out of the air the moment a spool is opened, and once that water is trapped inside the strand, heating it in the nozzle turns it to steam. That steam is what causes the popping sound, the tiny bubbles in a layer, and the brittle, foggy finish that snaps under load. SUNLU's fix starts before you even open the box: each spool is vacuum sealed airtight, so the filament stays dry from the factory, not just dry until it ships. The PLA+ 2.0 formula is also a different blend from standard PLA, engineered to resist cracking and take more of a hit without shattering, which is why it holds up in parts that actually get used and not just displayed on a shelf. Add the neatly wound spool, which keeps the strand from crossing over itself and snagging mid-print, and a tolerance of plus or minus 0.02mm that keeps it feeding consistently through nearly any 1.75mm printer, and the whole chain adds up to fewer failed prints and less time babysitting the machine, which is the actual cost most people forget to count.
You are not really buying plastic, you are buying dry storage and consistency, the two things that quietly decide whether a print finishes clean or gets pulled off the bed and binned. Any spool can hold PLA, the real question is whether it still behaves the same on print thirty as it did on print one. That is the whole trick here, and it is the only thing worth paying attention to when you compare filament brands.
Worth it if
- You print functional parts that need to survive drops or stress
- You've had prints ruined by brittle or moisture-swollen filament before
- You want a spool that will not tangle or snag mid-print
Skip it if
- You already have a reliable spool that prints cleanly
- You need high-heat or flexible material beyond PLA's range
- You only print occasional decorative pieces
Not for anyone who needs heat resistance or flexibility beyond what PLA can offer.
If you print functional parts, brackets, mounts, anything that needs to survive a drop, this is a quiet yes, priced like commodity filament but behaving like a pickier one. If you already have a spool that prints clean and reliably, there is no reason to switch. And if you need heat resistance or flex beyond what PLA offers, this is not that material, it is still PLA at its core.
Check price on Amazon · around $45 or Add it to your Amazon cart to sit on it
Before you go
Is Sunlu Pla good quality?
Yes, judged by what the material is built to do: the PLA+ 2.0 formula resists cracking and brittleness better than standard PLA, and the vacuum packaging keeps it dry until opened, which is where most filament quality problems actually start.
What are the disadvantages of Sunlu Pla?
It is still PLA at its core, so it will not match the heat resistance or flexibility of materials like PETG or TPU, and once you break the vacuum seal it starts absorbing moisture again like any other PLA.
Full spec sheet
| Brand | SUNLU |
|---|---|
| Material | PLA+2.0 Filament |
| Color | 1kg*4 Black+black+black+black |
| Item Weight | 4 kg |
| Item Diameter | 1.75 millimeters |