Is the Mounting Dream TV wall mount actually worth it?
Worth it, if your studs line up
Why a crooked TV mount is so annoying to fix
You've eyeballed the TV from the couch, decided it's sitting a half-inch off level, and then done nothing about it, because unbolting a wall mount to fix a half-inch is not how anyone wants to spend a Saturday. That's the exact problem the mounting dream tv wall mount is built to dodge: a way to fix the level after the holes are already drilled.
How the mounting dream tv wall mount actually adjusts after install
Most full-motion mounts get one shot at level. You hang the arms, bolt the plate, and if the TV's a degree off, you're loosening lag bolts and starting over. The Mounting Dream MD2380 builds in a small escape hatch: a plus-or-minus 3 degree post-installation adjustment, so once the arms are up you can nudge the tilt without touching the wall again. That's the part worth understanding, because it's the difference between a mount you install once correctly and one you install, live with, then quietly hate.
The rest of the mechanism is straightforward six-arm geometry: pull the TV out to 17.5 inches from the wall for viewing, push it back to 3.4 inches when you want it flush, tilt 5 degrees up or 15 degrees down to kill glare from a window or floor lamp, swivel it toward whichever seat you're actually in that night. Robot-welded joints are the maker's claim for why it holds steady at full extension rather than sagging; that's a manufacturing claim, not something you can verify from a spec sheet, but the load rating (up to 99 lbs, VESA up to 400x400mm) is documented.
The catch, and it's a real one: this hardware is engineered for 16 inch stud spacing. If your studs run wider (18 or 24 inch, which shows up more in newer or oddly framed builds), the bolts won't reach both studs and Mounting Dream sells a separate model for that spacing. It is also explicitly not rated for drywall alone. Money here goes into arm engineering, not into stud flexibility.
You're not buying a bracket, you're buying the ability to correct a bad hang without redrilling anything. The arms and the tilt range are just mechanics; the post-installation adjustment is the actual feature. Whether that's worth forty dollars comes down to one measurement you can take before you buy: the distance between your studs.
Who the mounting dream tv wall mount fits, and who it doesn't
Worth it if
- your wall studs are 16 inches apart
- your TV falls within 32 to 70 inches and under 99 lbs
- you actually want tilt, swivel and extension, not a fixed low-profile mount
- you'd rather adjust the angle after mounting than get it perfect on the first try
Skip it if
- your studs are spaced 18 or 24 inches apart
- you're mounting into drywall with no stud access
- your TV is outside the 32 to 70 inch or 99 lb range
- you want the flattest possible fixed mount, not full motion
Not for drywall-only walls or stud spacing wider than 16 inches.
The mounting dream tv wall mount verdict
If your wall studs are standard 16 inch spacing and your TV falls between 32 and 70 inches and under 99 lbs, this is a quiet yes, it does exactly what a full motion mount should and lets you correct the angle after the fact. If your studs run wider, or you're mounting into drywall with no stud access, skip it and buy the hardware built for that wall instead of forcing this one to work.
Once it's up, the annoying part is over: no more eyeing the TV from the couch and wondering if it's crooked, because you can correct that after the fact instead of redoing the install. Day one looks like marking the paper template, driving into two studs, and swiveling the screen toward whichever chair you actually sit in. A very large number of owners rate this one the same way, calling it straightforward to install and steady once it's up, with the arms moving smoothly and no wobble once the TV's on.
Amazon shoppers rate it 4 out of 5 across 75,336 ratings. That is their number, not ours.
Before you go
Is Mounting Dream a good TV mount?
Yes, the build is solid steel with articulating arms rated to 99 lbs, and it includes a post-install leveling adjustment most mounts skip.
How to level mounting Dream TV wall mount?
Use the built-in plus-or-minus 3 degree adjustment on the arms after installation, no need to redrill or move the wall plate.
What size screws for mounting dream TV mount?
The kit ships with pre-labeled hardware bags sized to your TV's VESA pattern; concrete installs use separate Phi10x50mm anchors, available on request.
How do I attach my TV to a wall mount?
Mark stud locations with the included paper template, bolt the wall plate to two studs, then attach the TV bracket to the screen's VESA holes and hang it on the arm.
By the numbers
earn an unconditional yes at full priceOut of 147 electronics products we have reviewed. This one is a yes with a condition attached.
Verdict datasetQuestion indexCC BY 4.0
Full spec sheet
| Brand | Mounting Dream |
|---|---|
| Item Highlight | Mount Bracket with Swivel and Tilt, TV Bracket with Articulating Dual Arms, Fits 16” St… |
| Unit Count | 1 Count |
| Number of Items | 1 |
| Item Type Name | VESA 400mm (16" Studs) |
| Model Number | FBA_LYSB00SFSU53G-ELECTRNCS |
| Mfr Part Number | MD2380 |
| Mounting Type | Wall Mount |
Keep comparing
More electronics reviews.