Is the InnoGear Mic Stand Worth It?
Worth it for home setups, not for touring rigs
around $30price at time of review — check Amazon for current
- Worth it ifYou want one stand that covers seated and standing mic positions
- Skip it ifYou're touring or gigging nightly and need pro-grade rigidity
Amazon shoppers rate it 4.5 out of 5 across 1,884 ratings. That is their number, not ours.
By Daniel Kruger, consumer tech · updated 2026-07-29
As an Amazon Associate, Is It Worth It Reviews earns from qualifying purchases. It costs you nothing extra, and it has never changed a verdict.
You lean into the mic to land a line and the boom arm slowly sags, like it's changing its mind mid-sentence. Or you gesture a little too hard and the whole tripod skids an inch across the floor. Cheap stands rarely fail all at once, they fail in small, distracting ways that ruin a take. The InnoGear mic stand is built to answer exactly that doubt: will this thing actually hold still once there's a microphone hanging a couple feet out on an arm.
Here's the part the listing buries: a boom arm isn't just a length of pipe, it's a lever. The longer it extends and the heavier the mic clipped to the end, the more torque it puts on the base, which is why so many stands tip backward the second you swing the arm out. InnoGear's answer is weight and footprint, not cleverness: thickened steel tripod legs and a base that comes in around 4 pounds, wide enough to counter that leverage instead of fighting it with a taller pole. The boom itself runs 16 to 30 inches and swivels 360 degrees horizontally, 180 vertically, so you're setting the angle once and trusting the knobs to hold it, not re-adjusting every session. Height goes from about 28 to almost 90 inches, which covers a seated podcast mic and a standing vocal mic on the same stand. Pull the boom off entirely and it converts to a straight stand, and the included 3/8 to 5/8 screw adapter means it'll actually thread onto a Blue Yeti, an SM7B, an AT2020, or most USB mics without a separate adapter purchase.
So you're not really buying height range or a swivel arm, you're buying resistance to leverage, the thing that makes a boom stand either rock solid or a constant low-grade annoyance. Get that part right and the rest, the bag, the clips, the adapter, is just convenience stacked on top. Get it wrong and no amount of adjustability saves you from an arm that drifts every time you touch it.
Worth it if
- You want one stand that covers seated and standing mic positions
- You're mounting a standard USB or XLR mic under 2kg
- You want it to break down and travel in a bag
Skip it if
- You're touring or gigging nightly and need pro-grade rigidity
- Your mic or accessory load exceeds the stand's weight rating
- You need a boom that holds a heavy shock mount rock solid at full extension
Not for touring musicians who need road-case durability over a home-studio price.
If you're recording podcasts, streaming, or singing at home and want one stand that goes from desk height to standing without buying two, this is a quiet yes. If you're hauling gear to gigs nightly or mounting something heavier than a couple pounds, spend more on a stand built for that abuse instead.
Check price on Amazon · around $30 or Add it to your Amazon cart to sit on it
Before you go
Is a microphone stand worth it?
Yes, if you record with any consistency, a stand frees your hands and keeps mic distance consistent, which matters more for audio quality than most people expect.
Who makes the best mic stand?
There's no single best, it depends on whether you need studio-grade rigidity for touring or an affordable, adjustable stand for home recording, which is the gap InnoGear is built to fill.
Full spec sheet
| Brand Name | InnoGear |
|---|---|
| Model Number | TS186 |
| Unit Count | 1 Count |
| Included Components | Tripod Mic Stand, 3/8" to 5/8" Screw Adapter, Mic Holders, Cable Clips, Carrying Bag |
| Item Type Name | microphone stand |
| Model Name | TS186 |
| Manufacturer Part Number | TS186 |
| Set Name | InnoGear Microphone Stand Set |