Is the Gorilla Grip Ironing Board Cover Worth It?
By Errol Whitfield, tools & DIY · updated 2026-07-27
Worth it if you iron often enough to feel a slow iron drag
Worth it, if you actually iron regularly
around $25price at time of review — check Amazon for current
- Worth it ifYou iron often enough that a faster, cooler glide actually saves you time
- Skip it ifYou iron only a handful of times a year
Amazon shoppers rate it 4 out of 5 across 30,753 ratings. That is their number, not ours.
Affiliate link. Opens Amazon in a new tab.
As an Amazon Associate, Is It Worth It Reviews earns from qualifying purchases. It costs you nothing extra, and it has never changed a verdict.
You know the drag, literally, when an iron catches on a worn cotton cover and skids instead of gliding. You press down harder, which is exactly how you end up with a shiny scorch mark on a good shirt. Somewhere under that thin cover, the wire mesh of the board is pressing its pattern straight through into your clothes. That's the moment you start wondering if the cover itself, not the iron, is the problem.
Here's the part the listing buries: most ironing board covers are just fabric, and fabric absorbs heat instead of bouncing it back. That absorbed heat gets wasted warming the cover instead of your clothes, which is why you end up going over the same wrinkle three or four times. This cover swaps that fabric surface for a silicone coating, and silicone reflects heat rather than soaking it up. Practically, that means more of the iron's heat stays where you want it, at the fabric you're pressing, so wrinkles release faster and the iron glides instead of catching. The extra thick padding underneath is doing a separate job: it's a buffer so the board's mesh pattern doesn't transfer through to your clothes, and it adds enough loft that the reflective effect actually has something to bounce off of. Bungee-style elastic at the edges plus underside hook and loop straps keep the whole thing anchored to a standard board, so it doesn't bunch or slide mid-session. The 400 degree scorch rating just means the silicone can take direct iron contact without melting or staining, which is the actual failure mode of a cheap cover.
So you're not really buying a cover, you're buying back the minutes an absorbent surface was quietly wasting every time you ironed. The reflective coating is the whole mechanism, everything else, the padding, the straps, the sizing, exists to let that coating do its job without shifting around.
Worth it if
- You iron often enough that a faster, cooler glide actually saves you time
- Your current cover is worn thin, sliding, or showing scorch marks
- You want a standard-size board cover that won't need re-tightening mid-iron
Skip it if
- You iron only a handful of times a year
- Your board is a nonstandard size the nose pocket design won't fit
- Your current cover still lies flat and shows no wear
Not for someone who irons rarely enough that any cover would do the job unnoticed.
If you iron regularly and you're tired of scorch marks or a cover that slides around the board, this is a quiet yes. If you iron twice a year and your current cover still lies flat, save the twenty five dollars, you won't feel the difference enough to notice it.
Check price on Amazon · around $25 or Add it to your Amazon cart to sit on it
Before you go
Should you buy an ironing board cover bigger than the board?
No, a cover sized to fit your board snugly works better than an oversized one, since elasticized edges and straps need a close fit to stay taut and prevent shifting under the iron.
What is the best material for ironing board cover?
Silicone-coated covers outperform plain cotton or foil-backed ones because silicone reflects heat back toward your clothes instead of absorbing it, which speeds up wrinkle removal and reduces iron drag.
How do I know what size ironing board cover I need?
Measure your board's length and width at its widest point, standard boards run close to 15 by 54 inches, and check the cover's nose pocket design accommodates your board's tapered end.
Full spec sheet
| Material | Polyester & Polyester Blend |
|---|---|
| Brand | GORILLA GRIP |
| Color | Gray Silver |
| Product Dimensions | 15"W x 54"H |
| Item Weight | 0.29 kg |
More tools & diy reviews.