Are MIKKUPPA M12x1.5 Lug Nuts worth it?
A top pick in Tires & Wheels on Amazon (#11 when we checked, Oct 22, 2026)
Worth it if They are worth considering if your vehicle uses M12x1.5 studs and compatible aftermarket wheels, and you want a 20-piece set with conical 60-degree seats, closed ends, and a 19mm hex. Check fitment before ordering.
Good to know: If your wheel requires a different thread, seat shape, or lug-nut profile, look for a set matched to those exact specifications.
One-Piece Lug Nuts for a More Direct Wheel Fit
The driveway is not a showroom, so check fitment before you check the chrome. These MIKKUPPA M12x1.5 Lug Nuts use a one-piece construction rather than a two-piece design. That gives the fastener a single body from the external hex through the closed-end nut, with no separate cap-and-nut arrangement listed here.
The practical choice is the wheel interface. Each nut has a conical 60-degree seat, a fully threaded M12x1.5 interior, and a 3/4-inch, or 19mm, external hex. Those details work together only when they match your wheel studs and lug holes. The listing identifies these as replacements for specified Ford, Honda, Mazda, Jeep, Dodge, Chevrolet, and aftermarket wheel applications, but vehicle name alone is not enough.
MIKKUPPA also lists a 1.38-inch, or 35mm, length and a chrome finish. The seller says the coating went through a 72-hour salt-spray test and that the steel is cold forged and heat treated. Treat those as maker claims, while using the concrete dimensions to compare with your existing nuts. The listing recommends a hand wrench and provides torque guidance for 12mm fasteners of 72 to 80 ft-lbs. Confirm your vehicle's required torque before installation.
You get 20 one-piece, closed-end lug nuts with a chrome finish, a 19mm hex, and the stated M12x1.5 thread. That can cover a full set of wheel fasteners when the thread, seat, length, and wheel fit all match.
Great for
- Replacing a complete set of aftermarket-wheel lug nuts
- Vehicles using M12x1.5 wheel studs
- Drivers whose wheels use a conical 60-degree seat
- Buyers wanting 20 chrome, closed-end nuts with a 19mm hex
Maybe not for you if
- Your vehicle uses a thread size other than M12x1.5
- Your wheels require a different seat or lug-nut shape
- You need nuts matched to hub-cover clips or a different stud length
These lug nuts make sense for a buyer replacing a full set on a compatible Ford, Honda, Mazda, Jeep, Dodge, or Chevrolet application, especially with aftermarket wheels using a conical 60-degree seat. The 20-piece quantity, closed-end shape, 19mm hex, and one-piece construction give you a clear specification set to compare against the nuts already on the vehicle. Check the exact fit, stud length, and wheel requirements first, then install with a hand wrench and the vehicle's specified torque.
Amazon shoppers rate it 4.6 out of 5 across 8,946 ratings. That is their number, not ours.
Quick answers before you buy
What thread size do these lug nuts use?
M12x1.5. Confirm that your vehicle's wheel studs use this thread before ordering.
What type of wheel seat do they have?
They use a conical 60-degree seat. Compare that shape with your wheel's lug holes, especially on aftermarket wheels.
How many lug nuts are included?
The set includes 20 closed-end chrome lug nuts, each with a 3/4-inch, or 19mm, external hex.
Can I use an impact wrench?
No. The listing recommends a hand wrench because an electric impact wrench may apply excessive torque and damage the surface coating.
What torque does the listing provide for 12mm fasteners?
The listing gives 72 to 80 ft-lbs for 12mm fasteners. Confirm your vehicle manufacturer's required torque before installation.
The spec sheet, for those who want it
| Fastener Type | Wheel |
|---|---|
| Thread Size | M12 x 1.5 |
| Exterior Finish | Chrome |
| Color | Chrome |
| Thread Type | M12x1.5 |
| Inside Thread Size | M12 x 1.5 |
| Thread Style | Right Hand |
| Thread Coverage | Fully Threaded |
| Thread Class | Class 2B |
| Maximum Shear Strength | Several hundred MPa (megapascals) |
| Screw Head Style | closed end bulge |
| Compatible Groove Diameter | 12 millimeters |
| Drive Style | External Hex |
| Grade Rating | Commercial |
| Item Weight | 2.2 pounds |
| Size Name | M12x1.5 |
More top picks in Tires & Wheels
More top picks from Amazon, or every automotive review.