Is ELEGOO PLA Plus Filament worth it?
A top pick in Additive Manufacturing Products on Amazon (#7 when we checked, Nov 6, 2026)
Worth it if you want 2kg of white PLA Plus for a compatible 1.75mm FDM printer, especially for functional parts and projects where the listed toughness, neat winding, and consistent diameter matter.
Good to know: If you need a different diameter, color, or a filament verified for a specific printer profile, look for a spool matched to those requirements.
PLA Plus Filament for More Consistent FDM Printing
Your hands will find the corner they cut, and with filament that corner is often the feed path. ELEGOO PLA Plus Filament addresses that daily task with a stated 1.75mm diameter and accuracy of +/- 0.02mm. A more consistent filament diameter gives the extruder a steadier feed to work with, so the material can be deposited more evenly through a compatible FDM printer.
The listing pairs that dimensional accuracy with neatly wound spools and claims the winding reduces tangles, snaps, and line breakage. That matters because a clean spool path keeps the printer feeding material instead of making you stop to sort a crossed loop. The two 1kg spools provide 2kg total, so you have a practical supply for repeated projects rather than a single short run.
ELEGOO also lists enhanced toughness and impact strength, low warpage and shrinkage, and strong layer bonding. Those features position this PLA Plus for functional parts as well as display work. The recommended nozzle temperature is 200 to 230°C, and the material is described as easy to print with a glossy surface finish. Check your printer's filament requirements first, then set the profile within the maker's stated range.
You get two 1kg spools of white PLA Plus, giving you 2kg of material for repeated prints. The stated 1.75mm size and broad compatibility make it a practical supply for many compatible FDM printers.
Great for
- Owners of compatible 1.75mm FDM printers
- Makers printing functional parts and projects
- People who want two 1kg white spools
- Print queues that benefit from neatly wound filament
- Buyers seeking PLA Plus with a glossy finish
Maybe not for you if
- You need a filament size other than 1.75mm
- You need a specific color besides white
- Your printer requires a different material or temperature profile
ELEGOO PLA Plus is a sensible choice for anyone with a compatible 1.75mm FDM printer who wants a 2kg supply for functional parts, prototypes, and general projects. The case rests on useful basics: stated dimensional accuracy, neatly wound spools, moisture-sealed packaging, and listed toughness improvements over regular PLA. Set your printer within the recommended 200 to 230°C nozzle range and confirm fit before ordering. For the right printer, it gives you more material and a straightforward path to your next print.
Amazon shoppers rate it 4.6 out of 5 across 1,158 ratings. That is their number, not ours.
Quick answers before you buy
Is this filament compatible with my printer?
It is listed as compatible with most 1.75mm FDM 3D printers. Check your printer's supported filament size, material, and temperature range before buying.
How much filament is included?
The package includes two 1kg spools, for 2kg total of white PLA Plus filament.
What nozzle temperature should I use?
The listing recommends 200 to 230°C. Start within that range and follow your printer and slicer guidance for calibration.
What is the filament diameter?
The diameter is 1.75mm, with a listed accuracy of +/- 0.02mm.
Is the filament sealed for storage?
Yes. The listing says it is dried before packing and vacuum sealed to protect it from moisture and dust.
The spec sheet, for those who want it
| Brand Name | ELEGOO |
|---|---|
| Additional Features | Enhanced Toughness & Impact Strength, Less Tangling & Neatly Wound, Precise Dimensional Accuracy, Glossy Surface Finish, Compatibility with Most 1.75mm FDM 3D Printers |
| Manufacturer Part Number | MX-EL-3D-PP10 |
| Unit Count | 70.54 Ounce |
| Item Highlight | Upgrade PLA Filament, Less Tangle & No Clogs, +/- 0.02mm Accuracy, Moisture Sealed, 1kg Spool Fits Most FDM 3D Printers |
| Number of Items | 2 |
| Number of Packs | 2 |
| Warranty Description | 30 day guarantee for any quality reasons |
| Item Weight | 2 kg |
| Item Diameter | 1.75 millimeters |
| Material Type | Polylactic Acid |
| Color | White & White |
| Brand | ELEGOO |
| Material | Polylactic Acid |
| Color | White & White |
| Item Weight | 2 kg |
More top picks in Additive Manufacturing Products
More top picks from Amazon, or every industrial & scientific review.